Usando PHP a partir da linha de comando

Índice

Introdução

O principal foco do CLI SAPI é o desenvolvimento de aplicações shell com PHP. Existem algumas diferenças entre CLI SAPI e outras SAPIs que são explicadas neste capítulo. Vale a pena ressaltar que CLI e CGI são diferentes SAPIs embora compartilhem boa parte dos mesmos comportamentos.

O CLI SAPI é ativado por padrão usando --enable-cli, mas pode ser desativado usando a opção --disable-cli quando se executa o comando ./configure durante o processo de compilação do PHP.

O nome, a localização e a existência dos arquivos binários do CLI/CGI podem ser diferentes dependendo de como o PHP está instalado no seu sistema. Por padrão, quando executado o make, ambos CGI e CLI são compilados e colocados em sapi/cgi/php-cgi e sapi/cli/php, respectivamente, no seu diretório fonte do PHP. Você vai notar que ambos são nomeados php. O que acontece durante o make install depende da sua linha de configuração. Se o módulo SAPI é escolhido durante a configuração, como apxs, ou a opção --disable-cgi é utilizada, o CLI é copiado para {PREFIX}/bin/php durante make install, caso contrário o CGI é colocado lá. Assim, por exemplo, se o --with-apxs está na sua linha de configuração, em seguida, o CLI é copiado para {PREFIX}/bin/php durante o make install. Se você quiser substituir a instalação do binário CGI, use make install-cli depois de make install. Alternativamente, você pode especificar --disable-cgi na sua linha de configuração.

Nota:
Porque ambos --enable-cli e --enable-cgi são ativadas por padrão, ter simplesmente um --enable-cli na sua linha de configuração não significa necessariamente que o CLI será copiado para {PREFIX}/bin/php durante o make install.

O binário CLI é distribuído na pasta principal como php.exe no Windows. A versão CGI é distribuída como php-cgi.exe. Além disso, um php-win.exe é distribuído se o PHP é configurado com --enable-cli-win32. Isso faz o mesmo que a versão CLI, exceto que ele não exibe nenhum output e também não disponibiliza nenhum console.

Nota: Qual SAPI eu tenho?

A partir da linha de comando, digitar php -v lhe dirá se o php é CGI ou CLI. Veja também a função php_sapi_name() e a constante PHP_SAPI.

Nota:
A página do man Unix está disponível digitando man php no ambiente shell.

Improve This Page

Learn How To Improve This Page • Submit a Pull Request • Report a Bug

＋add a note

User Contributed Notes 33 notes

down

109

sep16 at psu dot edu ¶

12 years ago

You can easily parse command line arguments into the $_GET variable by using the parse_str() function.

<?php

parse_str(implode('&', array_slice($argv, 1)), $_GET);

?>

It behaves exactly like you'd expect with cgi-php.

$ php -f somefile.php a=1 b[]=2 b[]=3

This will set $_GET['a'] to '1' and $_GET['b'] to array('2', '3').

Even better, instead of putting that line in every file, take advantage of PHP's auto_prepend_file directive.  Put that line in its own file and set the auto_prepend_file directive in your cli-specific php.ini like so:

auto_prepend_file = "/etc/php/cli-php5.3/local.prepend.php"

It will be automatically prepended to any PHP file run from the command line.

down

apmuthu at usa dot net ¶

6 years ago

Adding a pause() function to PHP waiting for any user input returning it:

<?php
function pause() {
    $handle = fopen ("php://stdin","r");
    do { $line = fgets($handle); } while ($line == '');
    fclose($handle);
    return $line;
}
?>

down

frankNospamwanted at. toppoint dot. de ¶

9 years ago

Parsing commandline argument GET String without changing the PHP script (linux shell):
URL: index.php?a=1&b=2
Result: output.html

echo "" | php -R 'include("index.php");' -B 'parse_str($argv[1], $_GET);' 'a=1&b=2' >output.html

(no need to change php.ini)

You can put this 
  echo "" | php -R 'include("'$1'");' -B 'parse_str($argv[1], $_GET);' "$2"
in a bash script "php_get" to use it like this:
  php_get index.php 'a=1&b=2' >output.html
or directed to text browser...
  php_get index.php 'a=1&b=2' |w3m -T text/html

down

PSIKYO at mail dot dlut dot edu dot cn ¶

10 years ago

If you edit a php file in windows, upload and run it on linux with command line method. You may encounter a running problem probably like that:

[root@ItsCloud02 wsdl]# ./lnxcli.php
Extension './lnxcli.php' not present.

Or you may encounter some other strange problem.
Care the enter key. In windows environment, enter key generate two binary characters '0D0A'. But in Linux, enter key generate just only a 'OA'.
I wish it can help someone if you are using windows to code php and run it as a command line program on linux.

down

ohcc at 163 dot com ¶

7 years ago

use " instead of ' on windows when using the cli version with -r

php -r "echo 1" 
-- correct

php -r 'echo 1'
  PHP Parse error:  syntax error, unexpected ''echo' (T_ENCAPSED_AND_WHITESPACE), expecting end of file in Command line code on line 1

down

drewish at katherinehouse dot com ¶

18 years ago

When you're writing one line php scripts remember that 'php://stdin' is your friend. Here's a simple program I use to format PHP code for inclusion on my blog:

UNIX:
  cat test.php | php -r "print htmlentities(file_get_contents('php://stdin'));"

DOS/Windows:
  type test.php | php -r "print htmlentities(file_get_contents('php://stdin'));"

down

Kodeart ¶

12 years ago

Check directly without calling functions:

<?php

if (PHP_SAPI === 'cli')

{

   // ...

}

?>



You can define a constant to use it elsewhere

<?php

define('ISCLI', PHP_SAPI === 'cli');

?>

down

monte at ispi dot net ¶

21 years ago

I had a problem with the $argv values getting split up when they contained plus (+) signs. Be sure to use the CLI version, not CGI to get around it.

Monte

down

lucas dot vasconcelos at gmail dot com ¶

16 years ago

Just another variant of previous script that group arguments doesn't starts with '-' or '--'



<?php

function arguments($argv) {

    $_ARG = array();

    foreach ($argv as $arg) {

      if (ereg('--([^=]+)=(.*)',$arg,$reg)) {

        $_ARG[$reg[1]] = $reg[2];

      } elseif(ereg('^-([a-zA-Z0-9])',$arg,$reg)) {

            $_ARG[$reg[1]] = 'true';

      } else {

            $_ARG['input'][]=$arg;

      }

    }

  return $_ARG;

}



print_r(arguments($argv));

?>



$ php myscript.php --user=nobody /etc/apache2/*

Array

(

    [input] => Array

        (

            [0] => myscript.php

            [1] => /etc/apache2/apache2.conf

            [2] => /etc/apache2/conf.d

            [3] => /etc/apache2/envvars

            [4] => /etc/apache2/httpd.conf

            [5] => /etc/apache2/mods-available

            [6] => /etc/apache2/mods-enabled

            [7] => /etc/apache2/ports.conf

            [8] => /etc/apache2/sites-available

            [9] => /etc/apache2/sites-enabled

        )



    [user] => nobody

)

down

Anonymous ¶

3 years ago

We can pass many arguments directly into the hashbang line.
As example many ini setting via the -d parameter of php.
---
#!/usr/bin/php -d memory_limit=2048M -d post_max_size=0
phpinfo();
exit;
---
./script | grep memory
memory_limit => 2048M => 2048M
---
But we can also use this behaviour into a second script, so it call the first as an interpreter, via the hashbang:
---
#!./script arg1 arg2 arg3 
---
However the parameters are dispatched in a different way into $argv

All the parameters are in $argv[1], $argv[0] is the interpreter script name, and $argv[1] is the caller script name.

To get back the parameters into $argv, we can simply test if $argv[1] contains spaces, and then dispatch again as normal: 

#!/usr/bin/php -d memory_limit=2048M -d post_max_size=0
<?php
var_dump($argv);
if (strpos($argv[1], ' ') !== false){
  $argw = explode(" ", $argv[1]);
  array_unshift($argw, $argv[2]);
  $argv = $argw;
}
var_dump($argv); ?>
---
array(3) {
  [0]=>
  string(8) "./script"
  [1]=>
  string(15) "arg1 arg2 arg3 "
  [2]=>
  string(14) "./other_script"
}
array(4) {
  [0]=>
  string(8) "./other_script"
  [1]=>
  string(4) "arg1"
  [2]=>
  string(4) "arg2"
  [3]=>
  string(4) "arg3"
}
---
This will maintain the same behaviour in all cases and allow to even double click a script to call both parameters of another script, and even make a full interpreter language layer.  The other script doesn't has to be php. Take care of paths.

down

ben at slax0rnet dot com ¶

20 years ago

Just a note for people trying to use interactive mode from the commandline.

The purpose of interactive mode is to parse code snippits without actually leaving php, and it works like this:

[root@localhost php-4.3.4]# php -a
Interactive mode enabled

<?php echo "hi!"; ?>
<note, here we would press CTRL-D to parse everything we've entered so far>
hi!
<?php exit(); ?>
<ctrl-d here again>
[root@localhost php-4.3.4]#

I noticed this somehow got ommited from the docs, hope it helps someone!

down

notreallyanaddress at somerandomaddr dot com ¶

14 years ago

If you want to be interactive with the user and accept user input, all you need to do is read from stdin.  

<?php
echo "Are you sure you want to do this?  Type 'yes' to continue: ";
$handle = fopen ("php://stdin","r");
$line = fgets($handle);
if(trim($line) != 'yes'){
    echo "ABORTING!\n";
    exit;
}
echo "\n";
echo "Thank you, continuing...\n";
?>

down

OverFlow636 at gmail dot com ¶

18 years ago

I needed this, you proly wont tho.

puts the exicution args into $_GET

<?php

if ($argv) {

    foreach ($argv as $k=>$v)

    {

        if ($k==0) continue;

        $it = explode("=",$argv[$i]);

        if (isset($it[1])) $_GET[$it[0]] = $it[1];

    }

}

?>

down

thomas dot harding at laposte dot net ¶

16 years ago

Parsing command line: optimization is evil!

One thing all contributors on this page forgotten is that you can suround an argv with single or double quotes. So the join coupled together with the preg_match_all will always break that :)

Here is a proposal:

#!/usr/bin/php
<?php
print_r(arguments($argv));

function arguments ( $args )
{
  array_shift( $args );
  $endofoptions = false;

  $ret = array
    (
    'commands' => array(),
    'options' => array(),
    'flags'    => array(),
    'arguments' => array(),
    );

  while ( $arg = array_shift($args) )
  {

    // if we have reached end of options,
    //we cast all remaining argvs as arguments
    if ($endofoptions)
    {
      $ret['arguments'][] = $arg;
      continue;
    }

    // Is it a command? (prefixed with --)
    if ( substr( $arg, 0, 2 ) === '--' )
    {

      // is it the end of options flag?
      if (!isset ($arg[3]))
      {
        $endofoptions = true;; // end of options;
        continue;
      }

      $value = "";
      $com   = substr( $arg, 2 );

      // is it the syntax '--option=argument'?
      if (strpos($com,'='))
        list($com,$value) = split("=",$com,2);

      // is the option not followed by another option but by arguments
      elseif (strpos($args[0],'-') !== 0)
      {
        while (strpos($args[0],'-') !== 0)
          $value .= array_shift($args).' ';
        $value = rtrim($value,' ');
      }

      $ret['options'][$com] = !empty($value) ? $value : true;
      continue;

    }

    // Is it a flag or a serial of flags? (prefixed with -)
    if ( substr( $arg, 0, 1 ) === '-' )
    {
      for ($i = 1; isset($arg[$i]) ; $i++)
        $ret['flags'][] = $arg[$i];
      continue;
    }

    // finally, it is not option, nor flag, nor argument
    $ret['commands'][] = $arg;
    continue;
  }

  if (!count($ret['options']) && !count($ret['flags']))
  {
    $ret['arguments'] = array_merge($ret['commands'], $ret['arguments']);
    $ret['commands'] = array();
  }
return $ret;
}

exit (0)

/* vim: set expandtab tabstop=2 shiftwidth=2: */
?>

down

rob ¶

17 years ago

i use emacs in c-mode for editing.  in 4.3, starting a cli script like so:

#!/usr/bin/php -q /* -*- c -*- */
<?php

told emacs to drop into c-mode automatically when i loaded the file for editing.  the '-q' flag didn't actually do anything (in the older cgi versions, it suppressed html output when the script was run) but it caused the commented mode line to be ignored by php.

in 5.2, '-q' has apparently been deprecated.  replace it with '--' to achieve the 4.3 invocation-with-emacs-mode-line behavior:

#!/usr/bin/php -- /* -*- c -*- */
<?php

don't go back to your 4.3 system and replace '-q' with '--'; it seems to cause php to hang waiting on STDIN...

down

goalain eat gmail dont com ¶

17 years ago

If your php script doesn't run with shebang (#!/usr/bin/php),

and it issues the beautifull and informative error message:

"Command not found."  just dos2unix yourscript.php

et voila.



If you still get the "Command not found." 

Just try to run it as ./myscript.php , with the "./"

if it works - it means your current directory is not in the executable search path.



If your php script doesn't run with shebang (#/usr/bin/php),

and it issues the beautifull and informative message:

"Invalid null command." it's probably because the "!" is missing in the the shebang line (like what's above) or something else in that area.



\Alon

down

jeff at noSpam[] dot genhex dot net ¶

21 years ago

You can also call the script from the command line after chmod'ing the file (ie: chmod 755 file.php).

On your first line of the file, enter "#!/usr/bin/php" (or to wherever your php executable is located).  If you want to suppress the PHP headers, use the line of "#!/usr/bin/php -q" for your path.

down

roberto dot dimas at gmail dot com ¶

19 years ago

One of the things I like about perl and vbscripts, is the fact that I can name a file e.g. 'test.pl' and just have to type 'test, without the .pl extension' on the windows command line and the command processor knows that it is a perl file and executes it using the perl command interpreter.

I did the same with the file extension .php3 (I will use php3 exclusivelly for command line php scripts, I'm doing this because my text editor VIM 6.3 already has the correct syntax highlighting for .php3 files ).

I modified the PATHEXT environment variable in Windows XP, from the " 'system' control panel applet->'Advanced' tab->'Environment Variables' button-> 'System variables' text area".

Then from control panel "Folder Options" applet-> 'File Types' tab, I added a new file extention (php3), using the button 'New'  and typing php3 in the window that pops up.

Then in the 'Details for php3 extention' area I used the 'Change' button to look for the Php.exe executable so that the php3 file extentions are associated with the php executable.

You have to modify also the 'PATH' environment variable, pointing to the folder where the php executable is installed

Hope this is useful to somebody

down

phpnotes at ssilk dot de ¶

21 years ago

To hand over the GET-variables in interactive mode like in HTTP-Mode (e.g. your URI is myprog.html?hugo=bla&bla=hugo), you have to call

php myprog.html '&hugo=bla&bla=hugo'

(two & instead of ? and &!)

There just a little difference in the $ARGC, $ARGV values, but I think this is in those cases not relevant.

down

Anonymous ¶

14 years ago

Using CLI (on WIN at least), some INI paths are relative to the current working directory.  For example, if your error_log = "php_errors.log", then php_errors.log will be created (or appended to if already exists) in whatever directory you happen to be in at the moment if you have write access there.  Instead of having random error logs all over the place because of this behavior, you may want to set error_log to a full path, perhaps to the php.exe directory.

down

linn at backendmedia dot com ¶

20 years ago

For those of you who want the old CGI behaviour that changes to the actual directory of the script use:
chdir(dirname($_SERVER['argv'][0]));

at the beginning of your scripts.

down

eric dot brison at anakeen dot com ¶

17 years ago

Just a variant of previous script to accept arguments with '=' also
<?php
function arguments($argv) {
    $_ARG = array();
    foreach ($argv as $arg) {
      if (ereg('--([^=]+)=(.*)',$arg,$reg)) {
        $_ARG[$reg[1]] = $reg[2];
      } elseif(ereg('-([a-zA-Z0-9])',$arg,$reg)) {
            $_ARG[$reg[1]] = 'true';
        }
   
    }
  return $_ARG;
}
?>
$ php myscript.php --user=nobody --password=secret -p --access="host=127.0.0.1 port=456" 
Array
(
    [user] => nobody
    [password] => secret
    [p] => true
    [access] => host=127.0.0.1 port=456
)

down

sam marshall ¶

5 years ago

When using the -R flag, the name of the variable containing the content of the current line (not including the LF) is $argn.

For example you can do this code:

cat file.txt | php -R 'echo $argn . "\n";'

This will just output each line of the input file without doing anything to it.

down

losbrutos at free dot fr ¶

16 years ago

an another "another variant" :

<?php
function arguments($argv)
{
  $_ARG = array();
  foreach ($argv as $arg)
  {
    if (preg_match('#^-{1,2}([a-zA-Z0-9]*)=?(.*)$#', $arg, $matches))
    {
      $key = $matches[1];
      switch ($matches[2])
      {
        case '':
        case 'true':
          $arg = true;
          break;
        case 'false':
          $arg = false;
          break;
        default:
          $arg = $matches[2];
      }
      $_ARG[$key] = $arg;
    }
    else
    {
      $_ARG['input'][] = $arg;
    }
  }
  return $_ARG;
}
?>

$php myscript.php arg1 -arg2=val2 --arg3=arg3 -arg4 --arg5 -arg6=false

Array
(
    [input] => Array
        (
            [0] => myscript.php
            [1] => arg1
        )

    [arg2] => val2
    [arg3] => arg3
    [arg4] => true
    [arg5] => true
    [arg5] => false
)

down

docey ¶

18 years ago

dunno if this is on linux the same but on windows evertime
you send somthing to the console screen php is waiting for
the console to return. therefor if you send a lot of small 
short amounts of text, the console is starting to be using 
more cpu-cycles then php and thus slowing the script.

take a look at this sheme:
cpu-cycle:1 ->php: print("a");
cpu-cycle:2 ->cmd: output("a");
cpu-cycle:3 ->php: print("b");
cpu-cycle:4 ->cmd: output("b");
cpu-cycle:5 ->php: print("c");
cpu-cycle:6 ->cmd: output("c"); 
cpu-cylce:7 ->php: print("d");
cpu-cycle:8 ->cmd: output("d"); 
cpu-cylce:9 ->php: print("e");
cpu-cycle:0 ->cmd: output("e"); 

on the screen just appears "abcde". but if you write 
your script this way it will be far more faster:
cpu-cycle:1 ->php: ob_start();
cpu-cycle:2 ->php: print("abc");
cpu-cycle:3 ->php: print("de");
cpu-cycle:4 ->php: $data = ob_get_contents();
cpu-cycle:5 ->php: ob_end_clean();
cpu-cycle:6 ->php: print($data);
cpu-cycle:7 ->cmd: output("abcde");

now this is just a small example but if you are writing an
app that is outputting a lot to the console, i.e. a text
based screen with frequent updates, then its much better 
to first cach all output, and output is as one big chunk of
text instead of one char a the time. 

ouput buffering is ideal for this. in my script i outputted
almost 4000chars of info and just by caching it first, it
speeded up by almost 400% and dropped cpu-usage.

because what is being displayed doesn't matter, be it 2
chars or 40.0000 chars, just the call to output takes a 
great deal of time. remeber that.

maybe someone can test if this is the same on unix-based
systems. it seems that the STDOUT stream just waits for 
the console to report ready, before continueing execution.

down

Adam, php(at)getwebspace.com ¶

21 years ago

Ok, I've had a heck of a time with PHP > 4.3.x and whether to use CLI vs CGI. The CGI version of 4.3.2 would return (in browser):
---
No input file specified.
---

And the CLI version would return:
---
500 Internal Server Error
---

It appears that in CGI mode, PHP looks at the environment variable PATH_TRANSLATED to determine the script to execute and ignores command line. That is why in the absensce of this environment variable, you get "No input file specified." However, in CLI mode the HTTP headers are not printed. I believe this is intended behavior for both situations but creates a problem when you have a CGI wrapper that sends environment variables but passes the actual script name on the command line.

By modifying my CGI wrapper to create this PATH_TRANSLATED environment variable, it solved my problem, and I was able to run the CGI build of 4.3.2

down

obfuscated at emailaddress dot com ¶

19 years ago

This posting is not a php-only problem, but hopefully will save someone a few hours of headaches.  Running on MacOS (although this could happen on any *nix I suppose), I was unable to get the script to execute without specifically envoking php from the command line:

[macg4:valencia/jobs] tim% test.php
./test.php: Command not found.

However, it worked just fine when php was envoked on the command line:

[macg4:valencia/jobs] tim% php test.php
Well, here we are...  Now what?

Was file access mode set for executable?  Yup.

[macg4:valencia/jobs] tim% ls -l 
total 16
-rwxr-xr-x  1 tim  staff   242 Feb 24 17:23 test.php

And you did, of course, remember to add the php command as the first line of your script, yeah?  Of course.

#!/usr/bin/php
<?php print "Well, here we are...  Now what?\n"; ?>

So why dudn't it work?  Well, like I said... on a Mac.... but I also occasionally edit the files on my Windows portable (i.e. when I'm travelling and don't have my trusty Mac available)...  Using, say, WordPad on Windows... and BBEdit on the Mac...

Aaahhh... in BBEdit check how the file is being saved!  Mac?  Unix?  or Dos?  Bingo.  It had been saved as Dos format.  Change it to Unix:

[macg4:valencia/jobs] tim% ./test.php
Well, here we are...  Now what?
[macg4:valencia/jobs] tim% 

NB: If you're editing your php files on multiple platforms (i.e. Windows and Linux), make sure you double check the files are saved in a Unix format...  those \r's and \n's 'll bite cha!

down

bluej100@gmail ¶

17 years ago

In 5.1.2 (and others, I assume), the -f form silently drops the first argument after the script name from $_SERVER['argv']. I'd suggest avoiding it unless you need it for a special case.

down

Popeye at P-t-B dot com ¶

21 years ago

In *nix systems, use the WHICH command to show the location of the php binary executable. This is the path to use as the first line in your php shell script file. (#!/path/to/php -q) And execute php from the command line with the -v switch to see what version you are running.

example:

# which php
/usr/local/bin/php
# php -v
PHP 4.3.1 (cli) (built: Mar 27 2003 14:41:51)
Copyright (c) 1997-2002 The PHP Group
Zend Engine v1.3.0, Copyright (c) 1998-2002 Zend Technologies

In the above example, you would use: #!/usr/local/bin/php

Also note that, if you do not have the current/default directory in your PATH (.), you will have to use ./scriptfilename to execute your script file from the command line (or you will receive a "command not found" error). Use the ENV command to show your PATH environment variable value.

down

Alexander Plakidin ¶

21 years ago

How to change current directory in PHP script to script's directory when running it from command line using PHP 4.3.0?
(you'll probably need to add this to older scripts when running them under PHP 4.3.0 for backwards compatibility)

Here's what I am using:
chdir(preg_replace('/\\/[^\\/]+$/',"",$PHP_SELF));

Note: documentation says that "PHP_SELF" is not available in command-line PHP scripts. Though, it IS available. Probably this will be changed in future version, so don't rely on this line of code...

Use $_SERVER['PHP_SELF'] instead of just $PHP_SELF if you have register_globals=Off

down

stromdotcom at hotmail dot com ¶

18 years ago

Spawning php-win.exe as a child process to handle scripting in Windows applications has a few quirks (all having to do with pipes between Windows apps and console apps).

To do this in C++:

// We will run php.exe as a child process after creating
// two pipes and attaching them to stdin and stdout
// of the child process
// Define sa struct such that child inherits our handles

SECURITY_ATTRIBUTES sa = { sizeof(SECURITY_ATTRIBUTES) };
sa.bInheritHandle = TRUE;
sa.lpSecurityDescriptor = NULL;

// Create the handles for our two pipes (two handles per pipe, one for each end)
// We will have one pipe for stdin, and one for stdout, each with a READ and WRITE end
HANDLE hStdoutRd, hStdoutWr, hStdinRd, hStdinWr;

// Now create the pipes, and make them inheritable
CreatePipe (&hStdoutRd, &hStdoutWr, &sa, 0))
SetHandleInformation(hStdoutRd, HANDLE_FLAG_INHERIT, 0);
CreatePipe (&hStdinRd, &hStdinWr, &sa, 0)
SetHandleInformation(hStdinWr, HANDLE_FLAG_INHERIT, 0);

// Now we have two pipes, we can create the process
// First, fill out the usage structs
STARTUPINFO si = { sizeof(STARTUPINFO) };
PROCESS_INFORMATION pi;
si.dwFlags = STARTF_USESTDHANDLES;
si.hStdOutput = hStdoutWr;
si.hStdInput  = hStdinRd;

// And finally, create the process
CreateProcess (NULL, "c:\\php\\php-win.exe", NULL, NULL, TRUE, NORMAL_PRIORITY_CLASS, NULL, NULL, &si, &pi);

// Close the handles we aren't using
CloseHandle(hStdoutWr);
CloseHandle(hStdinRd);

// Now that we have the process running, we can start pushing PHP at it
WriteFile(hStdinWr, "<?php echo 'test'; ?>", 9, &dwWritten, NULL);

// When we're done writing to stdin, we close that pipe
CloseHandle(hStdinWr);

// Reading from stdout is only slightly more complicated
int i;

std::string processed("");
char buf[128];

while ( (ReadFile(hStdoutRd, buf, 128, &dwRead, NULL) && (dwRead != 0)) ) {
    for (i = 0; i < dwRead; i++)
        processed += buf[i];
}    

// Done reading, so close this handle too
CloseHandle(hStdoutRd);

A full implementation (implemented as a C++ class) is available at http://www.stromcode.com

down

pyxl at jerrell dot com ¶

22 years ago

Assuming --prefix=/usr/local/php, it's better to create a symlink from /usr/bin/php or /usr/local/bin/php to target /usr/local/php/bin/php so that it's both in your path and automatically correct every time you rebuild.  If you forgot to do that copy of the binary after a rebuild, you can do all kinds of wild goose chasing when things break.

down

james_s2010 at NOSPAM dot hotmail dot com ¶

16 years ago

I was looking for a way to interactively get a single character response from user. Using STDIN with fread, fgets and such will only work after pressing enter. So I came up with this instead:



#!/usr/bin/php -q

<?php

function inKey($vals) {

    $inKey = "";

    While(!in_array($inKey,$vals)) {

        $inKey = trim(`read -s -n1 valu;echo \$valu`);

    }

    return $inKey;

}

function echoAT($Row,$Col,$prompt="") {

    // Display prompt at specific screen coords

    echo "\033[".$Row.";".$Col."H".$prompt;

}

    // Display prompt at position 10,10

    echoAT(10,10,"Opt : ");



    // Define acceptable responses

    $options = array("1","2","3","4","X");



    // Get user response

    $key = inKey($options);



    // Display user response & exit

    echoAT(12,10,"Pressed : $key\n");

?>



Hope this helps someone.

＋add a note